M10, 10 Ton, Machine Screw Jack

M10

M10, 10 Ton, Machine Screw Jack

UNI-LIFT M10 machine screw jacks offer precise positioning, uniform lifting speeds and capacity up to 10 Tons. Standard model configurations include upright or inverted units with translating or rotating lifting screws. End configurations include top plate, plain, threaded, and clevis ends.

Specifications

  • Capacity (imperial tons): 10
  • Load Screw Diameter (in): 2
  • Lead of Screw (in): 0.500
  • Gear Center (in): 2.598
  • Gear Ratio (in) Low: 8:1
  • Turns of Input Shaft - 1 inch Low: 16
  • Torque Required to Lift 1 lbs. (in-lbs) Low: 0.029
  • No Load Torque (in-lbs): 18
  • Maximum Input RPM: 1800
  • Estimated Weight (lbs) 0" Travel: 45
  • Estimated Weight (lbs) Per Inch: 1.1
  • Radius of Gyration (in): 0.423
  • Maximum Travel (in): 228
  • Maximum Speed (in-min): 113

Dimensions

Series Comparison

Model Number Capacity (imperial tons) Load Screw Diameter (in) Lead of Screw (in) Gear Center (in) Gear Ratio (in) Low Turns of Input Shaft - 1 inch Low Torque Required to Lift 1 lbs. (in-lbs) Low No Load Torque (in-lbs) Maximum Input RPM Estimated Weight (lbs) 0" Travel Estimated Weight (lbs) Per Inch Radius of Gyration (in) Maximum Travel (in) Maximum Speed (in-min)
MA5 0.25 0.500 0.250 0.938 5:1 20 0.022 2.0 2587 2 0.1 0.094 136 129
MA15 0.75 0.625 0.250/0.125 0.938 5:1 20 0.020 2.0 2587 2 0.1 0.125 136 129
MA20 1 0.750 0.200 1.250 5:1 25 0.020 4.0 2587 5 0.5 0.154 230 104
M1 1 0.750 0.250 1.500 5:1 20 0.021 3.0 2587 9 0.2 0.156 230 129
M2 2 1 0.250 1.75 6:1 24 0.020 5 1800 17 0.6 0.218 232 75
M3 3 1 0.250 1.831 6:1 24 0.021 4 1800 13 0.4 0.218 229 75
M4 4 1.5 0.333 2.256 5 1/3 :1 16 0.030 5 1800 23 0.7 0.334 228 113
M5 5 1.5 0.375 2.188 6:1 16 0.028 12 1800 30 0.7 0.316 230 113
M8 8 1.75 0.333 3.01 6:1 18 0.030 7 1800 47 0.9 0.396 226 100
M10 10 2 0.500 2.598 8:1 16 0.029 18 1800 45 1.1 0.423 228 113
M15 15 2.25 0.500 2.598 8:1 16 0.031 18 1800 55 1.2 0.486 224 113
M20 20 2.5 0.500 2.875 8:1 16 0.033 36 1800 80 1.7 0.566 224 113
M25 25 2.75 0.500 4.005 9:1 18 0.031 10 1450 103 2.1 0.628 223 81
M30 30 3.375 0.667 3.75 10 2/3 :1 16 0.034 48 1200 145 2.9 0.743 228 75
M40 40 4.25 0.667 5.162 - - - 12 1200 230 5 0.985 222 40
M50 50 4.25 0.667 5.313 10 2/3:1 16 0.040 96 1200 280 5 1.074 222 75
M75 75 5 0.667 6.003 10 2/3:1 16 0.042 156 900 495 6.3 1.149 225 56
M100 100 6 0.750 7.5 12:1 16 0.045 204 900 845 7.4 1.387 222 56
M150 150
M250 250
MSeriesConfigurable